-
Warm up in peace and quiet with a unique fan design that reduces air turbulence and noise
-
Includes adjustable, built-in thermostat with positive â€Ĺ“offâ€Âť position
-
Circulate air during the warmer months with the fan-only mode
-
Rest easyâ€â€ťincludes high-temperature safety shutoff feature
-
No sharp edges
-
Proudly made in the USA
-
2-year warranty
-
UL listed
Overall Dimensions: 16-3/4" W x 21" H x 13/16" D (grill depth)
Rough-in Dimensions: 14-1/4" W x 19-1/4" H x 4" D
Architectural - Engineering Information
Fan forced electric air heaters are UL Listed and factory rated at 208 volts or dual rated 208/240 volts. Element is of nichrome type with an oversized 25 amp rated, at 240V, high temperature manual reset limit switch. Blower delivers 90 CFM and is driven by an impedance protected motor. The motor is totally isolated from the heating chamber. Metal screen has expanded sheet metal, 22 gauge construction and be finished in black. Grill frame has 22 gauge construction, mounted with 3 screws and finished with a powder coat paint system. A painted 22 gauge wall mounting can with 2 knockouts and 70 cubic inch wiring compartment is also available.
Technical Information
UL safety standards require the heater to be placed a minimum distance of 6 inches (15.2 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater. Install vertically. This heater is not approved for horizontal or ceiling installation. Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.