Part Number 088L0077
Danfoss Reflect Heat Distribution Plates
Manufacturer's List Price
Availability May Vary, Dependent on Item
Danfoss Reflect Heat Insulation Plates Quick and Easy Installation Under Engineered Wood or Laminate Floors Box of 4 (Approx 20 Sq, Ft.) 19.75" x 39.50" x .5" Thick Provides 4" Cable Spacing
"Reflect" can be installed under a wooden laminate floor in just about any location in the home. The natural look and feel of the wood is not affected by the underlying insulating sheets or the rising heat because the heat is given off in a gentle and controlled manner. You simply lay the insulating heat distribution plates on the existing floor, press the heating cable into place, lay the wooden floor directly on top, connect the thermostat, and you can turn on the heat! It cannot get any simpler, faster or cleaner. The combination of an insulating subfloor and a heat conducting surface ensures optimum heat reflection upwards. As a result, a relatively low amount of power will suffice to provide the desired heating comfort and reaction time. The system can be installed on concrete floors or directly on wooden floors without additional preparation. Danfoss "Reflect" provides the necessary insulation against the subfloor. Danfoss "Reflect" consists of a ½ polystyrene plate covered with a 1/32 aluminum plate with a special profile. Depending on the desired effect, the heating cable is installed in each, every second or every third cable groove. The Danfoss "Reflect" plates are simply and quickly adjusted to curves and angles by using a jigsaw and ensures a good heat distribution even into the border areas of the room.