QMark's high capacity, heavy-duty fan-forced heaters are designed for use almost anywhere in commercial, industrial or institutional areas requiring electric fan forced heaters.
They perform exceptionally will in such applications as entryways, hallways, restrooms, stores, detention environments and similar large areas. This series of heaters will accommodate pneumatic/electric or low voltage controls commonly used with computerized energy management systems.
Wattages range from 1500 to 4800
Standard voltage choices include 120, 208, 208/240, 277 and 480 volts. 347 and 600 volt iterations are also available upon request.
Designed for use almost anywhere in institutional, commercial or industrial areas where wall space is not available.
14 gauge louver front cover (painted Navajo White) with tamper resistant screws and 1/4 inch mesh screen.
Designed for recessed installation, but is easily adapted for surface mounting or T-bar mounting with the use of the optional surface mounting frame or T-bar frame kit.
Rugged steel fins are copper brazed to the low watt density, steel sheathed, tubular heating elements which are arranged in a uniform pattern.
Room temperature is controlled by a remote wall or built in thermostat which must be purchased separately.
Thermal cutout shuts off the heater in the event of overheating.
Optional: 24 or 120 volt control relay, SP or DP thermostat, transformer relay and PE kits for field installation.
Double pole single throw disconnect switch is provided.
EFF Specifications
EFF Installation Manual
EFF Series Submittals
