Unique application heater approved for installation in a concealed space, an area between a finished ceiling and drop ceiling, a plenum space, or inside a plenum. It may be installed in areas that are not readily accessible and may be installed for freeze protection.
Engineered for light commercial and residential use, they cost less to operate than large plenum heaters. They offer a high comfort level with a fan delay feature, eliminating cold air circulation at startup, and a thermostat range of 40° F to 90°F.
Designed to quietly achieve uniform heating and long lasting, maintenance free operation, they feature steel finned, low watt density elements arranged in uniform grid patterns and totally enclosed, permanently lubricated fan motors.
Dimensions: Height: 12" H x 14" L x 14" W
Five Year Warranty
Features:
18 gauge all steel casing with neutral grey polyester powder coat finish for corrosion protection
Easy to install using the hanging bracket supplied
Steel finned low watt density element. Fins and elements are arranged in a uniform grid pattern to assure that all incoming air passes through the heating element
High limit thermal cutout automatically shuts off current in the event of overheating and reactivates the heater when temperature returns to normal
Fan delay control
ETL Listed - Control number 9900268
Built in heavy duty contactor / relay
Control Box gasketed to keep out moisture and dust. NEMA 12 construction
Fan motor is totally enclosed, permanently lubricated and thermally protected
Single point field wiring connection
Rated for zero clearance to any surface mounted next to the sides, top and bottom of the metal cabinet; only the front and rear require clearance for exit and entry air
Thermostat temperature range: 40° F to 90° F with positive off
Copyright Electricheaterwarehouse.com - F. N. Cuthbert Inc.. All Rights Reserved. eCommerce Software by 3dcart.