My Account
Shopping Cart 0 item(s)
View Cart
Home > Unit Heaters > Standard Duty Unit Heaters > Qmark MUH Modular Unit Heaters

Qmark MUH0521 Electric Fan Forced Horizontal Blower Unit Heater - 3750/5000 watts (3.75/5.0 kw) - 208/240 Volts - Single/Three Phase

Part Number MUH0521
review 0 Review(s)
0
Qmark MUH0521 Electric Fan Forced Horizontal Blower Unit Heater - 3750/5000 watts (3.75/5.0 kw) - 208/240 Volts - Single/Three Phase
Qmark Marley Unit Heater
Review this item Review this item
Price
Manufacturer's List Price
$1,223.00
Your Savings:
$692.00
Your Price:
$531.00
Availability May Vary, Dependent on Item
Additional discounting may be available on select items - Please call us at 800-472-3292!
Choose Options
Controls & Accessories MT1 Single Pole Thermostat [+$122.00]
MMB10 Bracket [+$95.00]
Disconnect Switch - Field Mounted [+$198.00]
Factory-installed Electrical Options [+$145.00]
Quantity

   

Rugged - Light Weight - Advanced Design
 
Totally Versatile - All Models Mount Horizontally or Vertically
 
Voltages From 208 to 600 - 1 or 3 Phase -  3000 / 50,000 Watts


  • Unit mounts either horizontally or vertically. Totally versatile. For factories, warehouses, garages, stores, shipping rooms, power stations, aircraft hangers, etc. Can be used for primary, supplemental, spot or dual-system heating.

  • Wide range of optional control kits are field installable, increasing the MUH adaptability to the specification market.

  • Forced air unit heater with 10 power ratings; from 3kW to 50kW heating output; 208, 240, 277 and 480V; 10,230 to 170,500 BTU/hr.

  • 32 compatible models (no need to try to assemble a heating system from 70 or 80 models).

  • Heavy gauge die-formed steel housing. Two-toned smartly styled.

  • Advanced pull-through air flow design draws air across heating element for more even air distribution and cooler element operation.

  • Specially designed venturi outlet to meet that added throw as required in vertical position.

  • Branch circuit fusing (when required).

  • 1 or 3-phase wiring on 5 through 10kW 208/240V and 15kW 208V units (field interchangeable).

  • 24V control transformer standard on most models, providing a safer and more accurate means of temperature control. 3kW and 5kW 208-277V, have line voltage controls as standard (24V control available on made-to-order basis).

  • Automatic reset linear thermal cut-out, capillary type, provides protection over entire length of element areas (Manual reset protection available on made-to-order basis).

  • 2-speed fan selector switch (25 to 50kW models).

  • Fan delay feature eliminates cold drafts. Element heats up before fan cuts in, then fan continues to distribute heat after element shuts off.

  • Individually adjustable discharge louvers to control air flow.

 xx
NOTES:
  • All Standard Units Are Supplied With a Low Voltage Control Transformer and Contactor (24V) Except MUH03 & 05, 208, 240 & 277 Volt Models. Low Voltage Control On These Units Is Available On Made To Order. 

  • All Units Are Also Available On Special Order For 120V Control; Internal With Transformer or External Without Transformer.  Option 5A. Standard.  Option 5B offers a Made to Order - Amp Load Unbalanced on 3 Phase design.  Option 5C offers a Made to Order - Amp Load Balanced on 3 Phase.

Browse Similar Items